RetroPie - Revision history

Gr0x0rd at 03:45, 27 July 2019

2019-07-27T03:45:34Z

Gr0x0rd: /* Configuration */

2017-07-10T03:30:46Z

Configuration

Gr0x0rd at 15:21, 24 June 2017

2017-06-24T15:21:35Z

Gr0x0rd: /* Roms over NFS */

2017-06-24T04:47:37Z

Roms over NFS

Gr0x0rd: /* Kodi */

2017-06-24T04:42:38Z

Kodi

Gr0x0rd: /* Kodi */

2017-06-22T14:32:48Z

Kodi

Gr0x0rd: /* Kodi */

2017-06-22T14:28:43Z

Kodi

Gr0x0rd: /* Configuration */

2017-06-22T04:04:43Z

Configuration

Gr0x0rd: /* PS3 Controller */

2017-06-22T03:59:09Z

PS3 Controller

Gr0x0rd: /* PS3 Controller */

2017-06-22T02:13:17Z

PS3 Controller

@@ Line 15: / Line 15: @@
 ==== Services and Hostname ====
-At the time of this writing, the ssh deamon is disabled by default. To activate it, navigate to "Raspi-config" and choose "Advanced options". Note in this menu, things are a bit wonky- the left analog right and thumb seem to be the items that get you through these menus. Choose SSH and enable. To change the hostname, select option 2 in the same menu- note you will want to have your keyboard plugged in for this step. After changing the hostname, the system should reboot.
+At the time of this writing, the ssh deamon is disabled by default. To activate it, navigate to "Raspi-config" and choose "Advanced options" (RetroPie 4.1 and older) or "Interfacing Options" (4.1 and newer). Note in this menu, things are a bit wonky- the left analog right and thumb seem to be the items that get you through these menus. Choose SSH and enable. To change the hostname, select option 2 in the same menu- note you will want to have your keyboard plugged in for this step. After changing the hostname, the system should reboot.
 ==== PS3 Controller ====

@@ Line 12: / Line 12: @@
 <br><br>
 A note on navigating through the RetroPie menus: on the GUI based screens, the "A" button is the same as "enter" or "ok". The "B" button is cancel. The "Start" button brings up the RetroPie menu which allows you to configure controllers, quit or what have you. To get to advanced features, you'll need to select the RetroPie option and press A. Choose "RetroPie Setup" and press A. The console menus that now appear need to be navigated with the analog stick as opposed to the directional pad, and the select button is now the "ok" button as opposed to the A button.
 ==== PS3 Controller ====

← Older revision		Revision as of 15:21, 24 June 2017
Line 36:		Line 36:
	<br><Br>		<br><Br>
	Just a note on the above: if you install any ports or additional packages (such as Kodi), RetroPie stores these in the "ports" folder within the "roms" folder. So you may need to copy the ports folder from your RetroPie to your share or they will no longer show up.		Just a note on the above: if you install any ports or additional packages (such as Kodi), RetroPie stores these in the "ports" folder within the "roms" folder. So you may need to copy the ports folder from your RetroPie to your share or they will no longer show up.
		+
		+	==== Kodi on Startup ====
		+
		+	Depending on the audience it may be helpful to have the system boot right into Kodi. This will also avoid the need for having to use the controller.
		+	<br><br>
		+	Go into RetroPie setup and choose Configuration / Tools. Go into the autostart options, then select "Start Kodi at boot". Reboot your pi and you'll boot right into Kodi.

← Older revision		Revision as of 04:47, 24 June 2017
Line 33:		Line 33:
	Add the following line:		Add the following line:
	192.168.78.100:/home/gr0x0rd/files/roms /home/pi/RetroPie/roms nfs rw,nolock 0 0		192.168.78.100:/home/gr0x0rd/files/roms /home/pi/RetroPie/roms nfs rw,nolock 0 0
		+	Reboot your RetroPie and you should have all of your games ready to go in emulationstation. Hooray!
		+	<br><Br>
		+	Just a note on the above: if you install any ports or additional packages (such as Kodi), RetroPie stores these in the "ports" folder within the "roms" folder. So you may need to copy the ports folder from your RetroPie to your share or they will no longer show up.

← Older revision		Revision as of 04:42, 24 June 2017
Line 24:		Line 24:
	$ scp -r * pi@your.retropie.ip.here:/opt/retropie/configs/ports/kodi/		$ scp -r * pi@your.retropie.ip.here:/opt/retropie/configs/ports/kodi/
	Before launching kodi, you will need to connect your keyboard, as overwriting the default retropie files will prevent your game controller from working in kodi.		Before launching kodi, you will need to connect your keyboard, as overwriting the default retropie files will prevent your game controller from working in kodi.
		+
		+	==== Roms over NFS ====
		+
		+	I can't even begin to explain the benefits of having your ROMS stored on an NFS (or other) share on your network. Your games and save files will always be backed up if your memory card fails or what have you. To accomplish this there are a few steps: first, configure the pi to wait for network at boot.
		+	$ sudo raspi-config
		+	Next, add your network share to the fstab, for example
		+	$ sudo nano /etc/fstab
		+	Add the following line:
		+	192.168.78.100:/home/gr0x0rd/files/roms /home/pi/RetroPie/roms nfs rw,nolock 0 0

← Older revision		Revision as of 14:32, 22 June 2017
Line 23:		Line 23:
	The retropie installer will create a symlink in the pi home folder for .kodi that references /opt/retropie/configs/ports/kodi . If you have an existing .kodi configuration, you can scp those files there:		The retropie installer will create a symlink in the pi home folder for .kodi that references /opt/retropie/configs/ports/kodi . If you have an existing .kodi configuration, you can scp those files there:
	$ scp -r * pi@your.retropie.ip.here:/opt/retropie/configs/ports/kodi/		$ scp -r * pi@your.retropie.ip.here:/opt/retropie/configs/ports/kodi/
		+	Before launching kodi, you will need to connect your keyboard, as overwriting the default retropie files will prevent your game controller from working in kodi.

← Older revision		Revision as of 14:28, 22 June 2017
Line 20:		Line 20:

	Press A after selecting the RetroPie menu, then choose "RetroPie Setup" and press A. Choose "Manage Packages", then "Manage Optional Packages". Scroll down to Kodi using the analog stick and press the select button. Kodi will now be installed.		Press A after selecting the RetroPie menu, then choose "RetroPie Setup" and press A. Choose "Manage Packages", then "Manage Optional Packages". Scroll down to Kodi using the analog stick and press the select button. Kodi will now be installed.
		+	<br><br>
		+	The retropie installer will create a symlink in the pi home folder for .kodi that references /opt/retropie/configs/ports/kodi . If you have an existing .kodi configuration, you can scp those files there:
		+	$ scp -r * pi@your.retropie.ip.here:/opt/retropie/configs/ports/kodi/

@@ Line 9: / Line 9: @@
 === Configuration ===
-RetroPie will ask you to configure and input device. The operating system is designed to work with a gamepad, but if you have your keyboard plugged in you can configure it by holding a button for a few seconds. It would be advisable to use the corresponding arrows for left/right/up/down, enter for start, b for b and a for a.
+RetroPie will ask you to configure and input device. The operating system is designed to work with a gamepad, so that configuration is recommended (if you are using a PS3 controller, connect it via USB). Hold down a button to start the configuration process. You can also configure your keyboard by holding a button for a few seconds. It would be advisable to use the corresponding arrows for left/right/up/down, enter for start, b for b and a for a.
 ==== PS3 Controller ====
-If you have a bluetooth PS3 controller, this sadly won't work using its wireless connection out-of-the-box. You will need to press start to access the main RetroPie menu, then choose "RetroPie setup". Choose "Manage Packages", the "Manage Driver Packages". Install the PS3 controller driver. When done, choose the configuration option and connect a USB cable from the controller to your RetroPie install, if you haven't already. Disconnect the USB cable and press the home button on the controller. It should now be working.
+If you have a bluetooth PS3 controller, this sadly won't work using its wireless connection out-of-the-box. You will need to press start to access the main RetroPie menu, then choose "RetroPie setup". Choose "Manage Packages", then "Manage Driver Packages". Install the PS3 controller driver. When done, choose the configuration option and connect a USB cable from the controller to your RetroPie install, if you haven't already. Disconnect the USB cable and press the home button on the controller. It should now be working.

← Older revision		Revision as of 03:59, 22 June 2017
Line 13:		Line 13:
	==== PS3 Controller ====		==== PS3 Controller ====

−	If you have a bluetooth PS3 controller, this sadly won't work out-of-the-box. You will need to press start to access the main RetroPie menu, then choose "RetroPie setup". Choose "Manage Packages", the "Manage Driver Packages". Install the PS3 controller driver. When done, connect a USB cable to your RetroPie install, ~~and configure the controller~~. ~~When done, reboot the system and disconnect~~ the USB cable~~. When the system has booted,~~ press the home button on the controller. It should now be working.	+	If you have a bluetooth PS3 controller, this sadly won't work using its wireless connection out-of-the-box. You will need to press start to access the main RetroPie menu, then choose "RetroPie setup". Choose "Manage Packages", the "Manage Driver Packages". Install the PS3 controller driver. When done, choose the configuration option and connect a USB cable from the controller to your RetroPie install, if you haven't already. Disconnect the USB cable and press the home button on the controller. It should now be working.

← Older revision		Revision as of 02:13, 22 June 2017
Line 13:		Line 13:
	==== PS3 Controller ====		==== PS3 Controller ====

−	If you have a bluetooth PS3 controller, this sadly won't work out-of-the-box. You will need to press start to access the main RetroPie menu, then choose "RetroPie setup".	+	If you have a bluetooth PS3 controller, this sadly won't work out-of-the-box. You will need to press start to access the main RetroPie menu, then choose "RetroPie setup". Choose "Manage Packages", the "Manage Driver Packages". Install the PS3 controller driver. When done, connect a USB cable to your RetroPie install, and configure the controller. When done, reboot the system and disconnect the USB cable. When the system has booted, press the home button on the controller. It should now be working.